Viewing file:  nl80211-vnd-intel.h (4.49 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* Copyright (C) 2012-2014, 2018-2021 Intel Corporation
* Copyright (C) 2013-2015 Intel Mobile Communications GmbH
* Copyright (C) 2016-2017 Intel Deutschland GmbH
*/
#ifndef __VENDOR_CMD_INTEL_H__
#define __VENDOR_CMD_INTEL_H__
#define INTEL_OUI 0x001735
/**
* enum iwl_mvm_vendor_cmd - supported vendor commands
* @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
* @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
* This is useful when the CSME firmware owns the device and the kernel
* wants to use it. In case the CSME firmware has no connection active the
* kernel will manage on its own to get ownership of the device.
* When the CSME firmware has an active connection, the user space
* involvement is required. The kernel will assert the RFKILL signal with
* the "device not owned" reason so that nobody can touch the device. Then
* the user space can run the following flow to be able to get connected
* to the very same AP the CSME firmware is currently connected to:
*
* 1) The user space (NetworkManager) boots and sees that the device is
* in RFKILL because the host doesn't own the device
* 2) The user space asks the kernel what AP the CSME firmware is
* connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO)
* 3) The user space checks if it has a profile that matches the reply
* from the CSME firmware
* 4) The user space installs a network to the wpa_supplicant with a
* specific BSSID and a specific frequency
* 5) The user space prevents any type of full scan
* 6) The user space asks iwlmei to request ownership on the device (with
* this command)
* 7) iwlmei requests ownership from the CSME firmware
* 8) The CSME firmware grants ownership
* 9) iwlmei tells iwlwifi to lift the RFKILL
* 10) RFKILL OFF is reported to user space
* 11) The host boots the device, loads the firwmare, and connects to a
* specific BSSID without scanning including IP as fast as it can
* 12) The host reports to the CSME firmware that there is a connection
* 13) The TCP connection is preserved and the host has connectivity
*
* @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
* It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
* &IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
*/
enum iwl_mvm_vendor_cmd {
IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO = 0x2d,
IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP = 0x30,
IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT = 0x32,
};
enum iwl_vendor_auth_akm_mode {
IWL_VENDOR_AUTH_OPEN,
IWL_VENDOR_AUTH_RSNA = 0x6,
IWL_VENDOR_AUTH_RSNA_PSK,
IWL_VENDOR_AUTH_SAE = 0x9,
IWL_VENDOR_AUTH_MAX,
};
/**
* enum iwl_mvm_vendor_attr - attributes used in vendor commands
* @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
* @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
* @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
* @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
* @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
* mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
* @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
* roaming is forbidden or not. Value 1 means roaming is forbidden,
* 0 mean roaming is allowed.
* @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
* as specified in &enum iwl_vendor_auth_akm_mode.
* @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
* @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
* 0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
* @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
* collocated AP. Relevant for 6GHz AP info.
* @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
* Relevant for 6GHz AP info.
*
* @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
* @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
*/
enum iwl_mvm_vendor_attr {
__IWL_MVM_VENDOR_ATTR_INVALID = 0x00,
IWL_MVM_VENDOR_ATTR_VIF_ADDR = 0x02,
IWL_MVM_VENDOR_ATTR_ADDR = 0x0a,
IWL_MVM_VENDOR_ATTR_SSID = 0x3d,
IWL_MVM_VENDOR_ATTR_STA_CIPHER = 0x51,
IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN = 0x64,
IWL_MVM_VENDOR_ATTR_AUTH_MODE = 0x65,
IWL_MVM_VENDOR_ATTR_CHANNEL_NUM = 0x66,
IWL_MVM_VENDOR_ATTR_BAND = 0x69,
IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL = 0x70,
IWL_MVM_VENDOR_ATTR_COLLOC_ADDR = 0x71,
NUM_IWL_MVM_VENDOR_ATTR,
MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
};
#endif /* __VENDOR_CMD_INTEL_H__ */
|